User Manual

-17-
Set OSD Parameters
Language Chinese/English Page switching
Show Lat-long Show longitude and altitude
AD Calibrate Battery voltage calibration
OSD Pattern OSD interface selection
Default: Normal interface
Fighter:HUD interface
P or N (Xin) PAL/ NTSC selection
Show RSSI Display the AR port's voltage, 0-3.3V is corresponding to 0-100%
Cur Man Calibrate Current calibration %. The current sensor will adjust and input the correct
power. Consumption after landing to calibrate the displayed battery capacity
(MAH).
Unit Ft(imperial)and Meter(Metric)Unit Selection；
LowPowerAlarm There will be a flicker alarm when flight power is lower than this value.
Flight Parameters
Roll Roll Reverse
Pitch Pitch Reverse
Yaw Yaw Reverse
MIX More ways of mixed control include delta wing and V-tail wing, and Bi-motor plane,
Bi-motor flying wing and butterfly brake (mixed control of 1247channel).