Manualshelf

Instructions / Assembly

ManualsBrandsARK DESIGN ManualsBifold Doors30 in. x 80.5 in. 3-Lite Tempered Frosted Glass Solid Core White Prefinished Composite Pivot Bifold Door with Hardware
12345678
Step 7
With both door panels installed, secure each magnet
plate holders to the back of the door panels, flush to
the corners using the 5/8 in pan head screws.
With both door panels closed, position the magnet
bracket in place so that the magnetic strips make
contact with the plate holders inside the opening and
secure the bracket in position using the 2 in screws into
the header.
Step 8
Peel the double-sided tape off the back of the fascia and
apply directly onto the front surface of the track.
Step 7
With both door panels installed, secure each magnet
plate holders to the back of the door panels, flush to
the corners using the 5/8 in pan head screws.
With both door panels closed, position the magnet
bracket in place so that the magnetic strips make
contact with the plate holders inside the opening and
secure the bracket in position using the 2 in screws into
the header.
Step 8
Peel the double-sided tape off the back of the fascia and
apply directly onto the front surface of the track.
Step 7
With both door panels installed, secure each magnet
plate holders to the back of the door panels, flush to
the corners using the 5/8 in pan head screws.
With both door panels closed, position the magnet
bracket in place so that the magnetic strips make
contact with the plate holders inside the opening and
secure the bracket in position using the 2 in screws into
the header.
Step 8
Peel the double-sided tape off the back of the fascia and
apply directly onto the front surface of the track.
Step 7
With both door panels installed, secure each magnet
plate holders to the back of the door panels, flush to
the corners using the 5/8 in pan head screws.
With both door panels closed, position the magnet
bracket in place so that the magnetic strips make
contact with the plate holders inside the opening and
secure the bracket in position using the 2 in screws into
the header.
Step 8
Peel the double-sided tape off the back of the fascia and
apply directly onto the front surface of the track.
5
Magnetic catch and fascia installation
A B
With both door panels installed, secure each magnet plate holders
to the back of the door panels, flush to the corners using the ⅝" pan
head screws.
With both door panels closed, position the magnet bracket in place
so that the magnetic strips make contact with the plate holders
inside the opening and secure the bracket in position using the 2"
screws into the header.
Peel the double-sided tape o
the back of the fascia and
apply directly onto the front
surface of the track.
A B