Instructions / Assembly

Step 4
Position the bottom jamb pivot braclet 13/16 in
from the front of the opening. Using a Phillips
Screwdriver, insert 1-1/2 in flat head screws and
secure using all three holes.
Extend the bracket so that the hole location is 2-1/4 in
and secure in place by tightening the screw.
Repeat for the second bottom jamb pivot bracket on
the opposite side of your jamb opening.
2-1/4 in
13/16 in
3-1/2 in
11/16 in
Step 5
Position the Floor Bumper 3-1/2 in from the jamb
opening and 11/16 in from the pivot hole of the
bottom pivot jamb bracket. Use a 2 in pan head
screw to secure into place.
Repeat for the second bumper on the opposite side
of your jamb opening.
Step 4
Position the bottom jamb pivot braclet 13/16 in
from the front of the opening. Using a Phillips
Screwdriver, insert 1-1/2 in flat head screws and
secure using all three holes.
Extend the bracket so that the hole location is 2-1/4 in
and secure in place by tightening the screw.
Repeat for the second bottom jamb pivot bracket on
the opposite side of your jamb opening.
2-1/4 in
13/16 in
3-1/2 in
11/16 in
Step 5
Position the Floor Bumper 3-1/2 in from the jamb
opening and 11/16 in from the pivot hole of the
bottom pivot jamb bracket. Use a 2 in pan head
screw to secure into place.
Repeat for the second bumper on the opposite side
of your jamb opening.
3
Jamb pivot bracket and floor bumper installation
Position the bottom jamb
pivot bracket ⁄" from the
front of the opening. Using a
Phillips Screwdriver, insert
1-½" flat head screws and
secure using all three holes.
Extend the bracket so that the
hole location is 2-¼" and
secure in place by tightening
the screw.
Repeat for the second bottom
jamb pivot bracket on the
opposite side of your jamb
opening.
Position the Floor Bumper
3-½" from the jamb opening
and ⁄" from the pivot hole
of the bottom pivot jamb
bracket. Use a 2" pan head
screw to secure into place.
Repeat for the second bumper
on the opposite side of your
jamb opening.
A B
A B