Instructions / Assembly

1/2 in
2 in
Step 3
On the top of the door panel, position the outside edge
of the mounting plate 1/2 in from the edge of the door.
This will also ensure the pivot is located 2 in from the
edge of the door. Use 1-1/4 in pan head screws to
secure into place.
Note: Secure the mounting plate with the locking latch
at the back of the door panel.
5/8 in
2 in
On the bottom of the door panel, position the outside
edge of the bottom pivot 5/8 in from the edge of the
door. This will also ensure the pivot is located 2 in from
the edge of the door. Use 1-1/2 in flat head screws to
secure into place.
Repeat installation of the moutning plate and bottom
pivot for the second panel.
1/2 in
2 in
Step 3
On the top of the door panel, position the outside edge
of the mounting plate 1/2 in from the edge of the door.
This will also ensure the pivot is located 2 in from the
edge of the door. Use 1-1/4 in pan head screws to
secure into place.
Note: Secure the mounting plate with the locking latch
at the back of the door panel.
5/8 in
2 in
On the bottom of the door panel, position the outside
edge of the bottom pivot 5/8 in from the edge of the
door. This will also ensure the pivot is located 2 in from
the edge of the door. Use 1-1/2 in flat head screws to
secure into place.
Repeat installation of the moutning plate and bottom
pivot for the second panel.
1/2 in
2 in
Step 3
On the top of the door panel, position the outside edge
of the mounting plate 1/2 in from the edge of the door.
This will also ensure the pivot is located 2 in from the
edge of the door. Use 1-1/4 in pan head screws to
secure into place.
Note: Secure the mounting plate with the locking latch
at the back of the door panel.
5/8 in
2 in
On the bottom of the door panel, position the outside
edge of the bottom pivot 5/8 in from the edge of the
door. This will also ensure the pivot is located 2 in from
the edge of the door. Use 1-1/2 in flat head screws to
secure into place.
Repeat installation of the moutning plate and bottom
pivot for the second panel.
1/2 in
2 in
Step 3
On the top of the door panel, position the outside edge
of the mounting plate 1/2 in from the edge of the door.
This will also ensure the pivot is located 2 in from the
edge of the door. Use 1-1/4 in pan head screws to
secure into place.
Note: Secure the mounting plate with the locking latch
at the back of the door panel.
5/8 in
2 in
On the bottom of the door panel, position the outside
edge of the bottom pivot 5/8 in from the edge of the
door. This will also ensure the pivot is located 2 in from
the edge of the door. Use 1-1/2 in flat head screws to
secure into place.
Repeat installation of the moutning plate and bottom
pivot for the second panel.
2
Door panel hardware preparation
On the top of the door panel,
position the outside edge of
the mounting plate ½" from
the edge of the door. This will
also ensure the pivot is
located 2" from the edge of
the door. Use 1-¼" pan head
screws to secure into place.
On the bottom of the door
panel, position the outside
edge of the bottom pivot ⅝"
from the edge of the door.
This will also ensure the pivot
is located 2" from the edge of
the door. Use 1-½" flat head
screws to secure into place.
Repeat installation of the
mounting plate and bottom
pivot for the second panel.
A
B
A
B
Secure the mounting plate with
the locking latch at the back of the
door panel.
NOTE