Instructions / Assembly

Step 8 -
Check Operation,
Make Adjustments
If necessa ry use the
Wrench supplied to
adjust the bolts in the
Upper Pivot and Roller
to assu re the BiFold
door set is hanging
square in the opening.
The Lowe r Jamb Pivot
can be adjust ed with
a Phillips screwdriver.
Arrows in Figure 18
below sh ow directions
of adjustments .
Step 9 - Attach Fascia (& Fascia Block for 4-Door Installs )
For 2-Door Installs : Attach Fascia to Track by removing the tape backing and
push ing against track as shown in Figure 1 9 . Cut Fascia to fit if necessary.
(Cut with Fascia front up.)
FIGURE 18
Areas of Adjustment
FIGURE 19
Attach 2-Door
Fascia
- 8 -