Instructions / Assembly

Step 7 - Attach at Bottom Pivot
Attach the Botto m Pivot into the Lowe r
Ja mb Pivot as sh own in Figure 17 below
by depressi ng the spring- loaded tab
on the lowe r jamb pivot and inse rting
the tab on the botto m pivot into the hole
in the lower jamb pivot.
Step 6 - Mount Lower Jamb Pivot
U s e a P h i l l i p s s c re w d r i v e r t o
a d j u s t t h e L ow e r Ja m b P ivo t
t o th e po s i t i o n s h ow i n F i g u re
15 .Mount the Lower Jamb Pivot
by placing it directly under the
Track on the pivot side as shown
in Figures 1 5& 1 6 below. Fasten
with 1 EA Long Sc rew in the sl ot
first to allow adjust ment up and
down to give clearance between
Lowe r Jamb Pivot and the bottom
of the door as sh own in Figure 17 .
Add 2 EA Long Sc rews to the holes
in the Lower Jamb Pivot once adjust
ments are final.
Note: Make
su re and leave 1/8˝
clearance between
the top of the screw
head and the bottom
pivot for proper ope
ration. (See Step 8,
Check Operation,
Make Adjust ments
to adjust clearance .)
FIGURE 15
Use Phillips
Screwdriver To Adjust
FIGURE 17
Attach At Bottom Pivot
FIGURE 16
Mount Lower
J amb Pivot
- 7 -