Instructions / Assembly

Step 4- Fasten Mount Plates
Fast en Mount Pl ates as sh own below. Mount plates acco rding to the direction of
door swing; right swing or left swing as sh own in Figures 1 0 & 1 1 below. It may be
helpfu l to mark the mount plate holes with a penc il and usi ng a 3/32˝ drill bit, drill
a 1 ˝ deep pilot hole before insertng screws .N ote: Make sure t he nylon lock ing
arm is on the back of the door.
FIGURE 10
Right Swing
FIGURE 11
Left Swing
Step 5- Hang Doors by Inserti ng Bolts into Mount Plates
First insert the bolt in the Upper Pivot into the Lo ng Mount Plate and lock into place
by rotating the nylon arm as shown in Figures 1 3& 14 below. Next, inse rt the bolt in
the roller into the Short Mount Pl ate and lock the nylon arm.
FIGURE 13
Bolts Into Mount Plates
FIGURE 14
Rotate Nylon Arm
To Lock
- 6 -