Instructions / Assembly
Step 3- Mount Hinges
Lay Pa nels side by side on a flat, clean surface
as shown in Figure 7. Push the Pa nels together
and mount hi nges in pre- drilled pilot holes. Mount
Top/Bottom Hinge as sh own in Figure 8. Mount
Center Hinge at center of door as sh own
in Figure 9.
Note: Only use screws as shown
in figures below and use only
pre-drilled pilot holes.
FIGURE 7
Lay Panels Flat
FIGURE 8
Attach Top/Bottom
Hinges
FIGURE 9
Attach Center Hinge
- 5 -