Instructions / Assembly

Tools Needed: Phillips Screwdriver, Penc il, Drill, Measuring Device,
3/1 6˝ (5mm) Drill Bit, 3/32˝ (2mm) Drill Bit (optional for pilot holes) .
Contents (2 Door Set)
2X Panels 1X Fascia
1X Fascia Block
(for 4-Door Insallation
1X Lower Jamb Pivot 1X Bottom Pivot 1X Upper Pivot 1X Roller
1X Long Mount Plate 1X Short Mount Plate 1X Snugger 1X Pull
1X Track 1X Center Hinge 2X Top/Bottom Hinge 1X Long Spring
(for 4-Door Installation)
22X Long Screw 8X Short Screw 1X Machine Screw (Pull) 1X Wrench
- 3 -