User manual

Model: EC-GOLD Dual
ECGOLDDUALUM12.doc Rev: 1.2
21
7.0 CONTROLLER SETTINGS SHEET
Checked by
Model Number
Serial Number
Hardware Rev.
Software Rev.
The factory settings column below lists the typical default settings. The user may change these
values at any time. If changed, please fill in the USER SETTING column for future reference.
PARAMETER DESCRIPTION
FACTORY
SETTING
USER
SETTING
OUTPUT MODE
There are2 main output modes :
Analog(4-20 mA) and DVO (discrete Voltage
Output)
BUZZER TYPE
Enable or disable the buzzer
LOW ALARM DELAY
TO ON
The minimum time in seconds a Low Alarm must
exist before the corresponding relay and indicator
are activated.
LOW ALARM DELAY
TO OFF
The minimum time in seconds the Ec-Gold Dual
must be out of Low Alarm before the Low Alarm
relay and indicator are de-activated
HIGH ALARM DELAY
TO ON
The minimum time in seconds a High Alarm must
exist before the High Alarm relay and indicator are
activated.
HIGH ALARM DELAY
TO OFF
The minimum time in seconds the Ec-Gold Dual
must be out of High Alarm before the High Alarm
relay and indicator are de-activated.
Hi/Hi ALARM DELAY
To ON
The minimum time in seconds a Low Alarm must
exist before the corresponding relay and indicator
are activated.
Hi/Hi ALARM DELAY
To OFF
The minimum time in seconds the Ec-Gold Dual
must be out of Low Alarm before the Low Alarm
relay and indicator are de-activated
SENSOR #1
Type or Port.
Sensor serial number
Gas name
Low alarm value
High alarm value
Hi/Hi alarm value
Span Value