User manual

ManualsBrandsARJAY ENGINEERING ManualsConsumer electronicsEC-Gold Dual

Model: EC-GOLD

ECGOLDUM17.DOC Rev: 1.7

- 11 -

After switches 4 – 6 are set as required, press the Cal pushbutton to lock in the values.

3.3.3 SETTING THE HIGH ALARM

The EC-Gold will register a High Alarm condition when the sensor detects a gas

concentration equivalent or exceeding this value.

1. While the Status LED is blinking green, set the DIP switch as follows:

2. Switches 4-6 should be set as per the desired High Alarm ppm value. For example to

set the High Alarm value to 50 ppm, set switch 4 On (up), and switches 5 and 6 Off

(down).

3. Press the Cal pushbutton to lock in the value.

3.3.4 SETTING THE LOW ALARM

The EC-Gold will register a Low Alarm condition when the sensor detects a gas

concentration equivalent or exceeding this value.

1. While the Status LED is blinking green, set the DIP switch as follows:

2. Switches 4-6 should be set as per the desired Low Alarm ppm value. For example to

set the Low Alarm value to 35 ppm, set switches 4 and 5 Off (down), and switch 6 On

(up).

3. Press the Cal pushbutton to lock in the value.

3.3.5 SETTING THE CALIBRATION GAS CONCENTRATION

This value tells the EC-Gold what the value of gas concentration will be used during

calibration.

1. While the Status LED is blinking green, set the DIP switch as follows:

2. Switches 4-6 should be set as per the desired calibration gas ppm value. For example

to set the value to 100 ppm, set switches 4, 5, and 6 Off (down).

3. Press the Cal pushbutton to lock in the value.

12 3456

SET HIGH ALARM FUNCTION

SWs 4-6 set 1 of 8 different High Alarm values:

456

code 0 = 5

code 1 = 10

code 2 = 20

code 3 = 50

code 4 = 75

code 5 = 100

code 6 = 150

code 7 = 200

456

12 3456

SET LOW ALARM FUNCTION

SWs 4-6 set 1 of 8 different Low Alarm values:

456

code 0 = 1

code 1 = 2

code 2 = 3

code 3 = 10

code 4 = 20

code 5 = 25

code 6 = 35

code 7 = 50

456

12 3456

SET CAL CONCENTRATION FUNCTION

SWs 4-6 set 1 of 8 different Cal2 values:

456

code 0 = 5

code 1 = 10

code 2 = 20

code 3 = 25

code 4 = 35

code 5 = 50

code 6 = 75

code 7 = 100

456