User Manual
Table Of Contents
- For your safety
- WARNINGS
- THE APPLIANCE
- TH 721 D22 B/NG TH 7
- TH 721 D22 B/NG TH 7
- TH 721 D22 E/LPG TH 7
- TH 721 D22 E/NG TH 7
- TH 721 D22 E/NG TH 7
- TH 931 D2/A B/LPG TH 931 D2/A E/LPG
- TH 931 D2/A B/NG TH 931 D2/A E/NG
- TH 931 D2/A B/TG TH 931 D2/A E/TG
- DESCRIPTION OF THE APPLIANCE
- The detailed differences between the models are li
- TH 721 D22 B/LPG TH 931
- TH 721 D22 B/LPG TH 931
- TH 721 D22 B/TG TH 931
- TH 731 D2/A B/NG TH 931
- TH 731 D2/A B/TG TH 931
- TH 731 D2/A E/LPG TH 931
- TH 731 D2/A E/NG
- TH 731 D2/A E/TG
- There should be at least 170mm between top and the
- General safety
- CLEANING and MAINTENANCE
- PRACTICAL TIPS
- FAQ and TROBULE SHOOTING
- Blank Page
- Blank Page
6
Installation Instructions for Built-In
The following instructions are intended for the installer so that the installation and maintenance
procedures may be followed in the most professional and expert manner possible. Positioning
This appliance may only be installed and operated in permanently ventilated rooms in
compliance with provisions laid down by current regulations and standards.
The following requirement must be observed:
A）The room must be fitted with a ventilation system which vents smoke and gases from
combustion to outside. This is must be done by means of a hood or electric ventilator that turns
on automatically each time the hood is operated.
In a chimney stack or branched flue. Directly to the Outside
(exclusively for cooking appliances)