User Manual

Step 1 - Remove the outer
cap
Step 2 - Remove the inner
cap
Step 3 - Remove the burner
Step 4 - Place the burner back ensuring the
thermocouple and igniter (Circled) are fitted to the
appropriate slots in the burner
Step 5 - Please follow the steps below
a. Place the inner cap so that it fits properly
b. Place the outer cap ensuring that the arrow in the burner
aligns with the yellow mark indicated or slot on the
outer cap (Highlighted)
c. Replace the wok support
How to replace the battery?
Pic (a)
Pic (b)
The battery is located on the underside of
the gas hob as shown in Pic (a)
Pull the cover down as seen in Pic (b)
and replace the battery with type D
Note : Misaligned burners or caps would result in the following
issues
a. Popping sound
b. Flame goes out
c. Burner damage
13