User Manual
Table Of Contents
- For your safety
- WARNINGS
- THE APPLIANCE
- TH 721 D22 B/NG TH 7
- TH 721 D22 B/NG TH 7
- TH 721 D22 E/LPG TH 7
- TH 721 D22 E/NG TH 7
- TH 721 D22 E/NG TH 7
- TH 931 D2/A B/LPG TH 931 D2/A E/LPG
- TH 931 D2/A B/NG TH 931 D2/A E/NG
- TH 931 D2/A B/TG TH 931 D2/A E/TG
- DESCRIPTION OF THE APPLIANCE
- The detailed differences between the models are li
- TH 721 D22 B/LPG TH 931
- TH 721 D22 B/LPG TH 931
- TH 721 D22 B/TG TH 931
- TH 731 D2/A B/NG TH 931
- TH 731 D2/A B/TG TH 931
- TH 731 D2/A E/LPG TH 931
- TH 731 D2/A E/NG
- TH 731 D2/A E/TG
- There should be at least 170mm between top and the
- General safety
- CLEANING and MAINTENANCE
- PRACTICAL TIPS
- FAQ and TROBULE SHOOTING
- Blank Page
- Blank Page
9
The dimensions of the cutout for the appliance must be those indicated in the figure D. Clamps
are provided to fasten the cooktop to counters measuring from 20 to 60 mm in thickness. To
fasten the cooktop securely, it is recommended that all the clamps be used.
TH 721 D22 B/LPG TH 931 D2/A B/LPG
TH 721 D22 B/LPG TH 931 D2/A B/LPG
TH 721 D22 B/TG TH 931 D2/A B/NG
TH 731 D2/A B/LPG TH 931 D2/A B/TG
TH 731 D2/A B/NG TH 931 D2/A E/LPG
TH 731 D2/A B/TG TH 931 D2/A E/NG
TH 731 D2/A E/LPG TH 931 D2/A E/TG
TH 731 D2/A E/NG
TH 731 D2/A E/TG
There should be at least 170mm between top and the cabinet.
FIG.D.
Front