Technical data

13
5.2 POSITIONING PUMP GROUP
FIG. 5.2A SUGGESTED LOCATION
5. INSTALLATION
To Collector
Temperature
Sensor S1
From Collectors
To Collectors
AST 100
Controller
Cylinder
PRV
discharge
vessel
Fill point
Expansion
Vessel
Pump
Group
S3
S2
A flow limiter set is supplied separately, this must be fitted to the pump
group on the suction side of the pump as shown in fig. 5.1a.
FIG. 5.1A FITTING FLOW LIMITER
5.1 FITTING FLOW LIMITER
15Ø
Note:
The flow limiter is supplied with
fittings for 15Ø pipe.