Technical data

13
First
Information only options
Arr
VERS
°C
FORWARDBACKWARD
FORWARDBACKWARD
COL
hP
Press
and hold
LastFirst Last
Setup parameters
The backward button indexes the options back from the ‘setup
parameters’ through to the ‘infomation only’ options. From here the ‘system
setup parameters’ has to be accessed again by pressing and holding the
forward button at the last ‘display only’ option.
FIG. 5.4A MENU NAVIGATION
5.5 CONTROLLER SETTINGS
To change the menu option settings:-
1. Navigate to the required menu option - see above.
If the menu option can be changed or reset will also be
displayed.
TO CHANGE A VALUE
2. Press and hold set button until flashes.
3. The current setting will be displayed.
Record current value so value is not forgotten.
Press forward button to increase value or backward button to decrease
value.
4. Press and hold set button again until stops flashing.
The new value will now be saved.
TO RESET A VALUE
2. Press and hold set button until flashes, the value will be reset
to 0.
3. To confirm press set again until it stops flashing.
To interrupt reset or change procedure, do not press any button for
about 5 seconds and the controller option will return to previous setting.
AST 100
BACKWARD
FORWARD
SET
INDICATOR
LIGHT
Menu option
Value
Example shown menu option ‘Arr’