Technical information

48
6.5.10 REMOVING THE D.H.W. TEMPERATURE
PROBE (N.T.C.) (MFFI ONLY)
1. Remove the electrical connector “C4” by pulling off
(Fig. 6.88);
2. Unscrew and remove the D.H.W. temperature probe
“C5” (F
IG. 6.89).
C5
F
IG. 6.88
FIG. 6.89
6.5.9. REMOVING THE EXPANSION VESSEL
1. Loosen nut “C2” (FIG. 6.85);
2. Loosen nut “C3” (FIG. 6.86);
3. Remove the expansion vessel (FIG. 6.87).
C2
FIG. 6.85
F
IG. 6.86
F
IG. 6.87
C3
C4