Instruction Manual

3
EN
DAILY USE
. SELECT A FUNCTION
Simply press the button for the function you require to
select it.
. SET THE LENGTH
After selecting the function you require,
use or to set the length for it to
run.
The time can be changed during cooking by pressing
or or by increasing the length for 30 seconds
each time by pressing
. SET THE POWER OF THE MICROWAVE
Press as many times as required to
select the power level for the microwave.
To use the microwave in combination with the grill,
select the "Grill" function by pressing and then use
to set the microwave power.
Please note: You can also change this setting during cooking by
pressing .
. DEFROST DYNAMIC
Press , then use or to set the
weight of the food.
During defrosting, the
function will pause briefly
to allow you to turn the food.
Once the operation is complete, close the door and
press .
. ACTIVATE THE FUNCTION
Once you have applied the settings you require, press
to activate the function.
You can press at any time to pause the function
that is currently active.
. SAFETY LOCK
This function is automatically activated
to prevent the oven from being switched
on accidentally. Open and close the door, then press
to start the function.
. PAUSE
To pause an active function, for example to stir or turn
the food, simply open the door.
To start it up again, close the door and press
. JET START
When the oven is switched off, press
to activate
cooking with the microwave function set at full power
(750 W) for 30 seconds.
Every time the
button is pressed again, the cooking
time will be increased by a further 30 seconds.
. SET THE TIME
With the oven switched off, press
until the two digits for the hour (on the
left) starting flashing.
Use or to set the correct hour and press to
confirm: The minutes will flash on the display.
Use or to set the minutes and press to
confirm.
Please note: You may need to set the time again following
lengthy power outages.
. TIMER
When the oven is switched off, the display can be used
as a timer. To activate the function and set the length of
time you require, use
or . Press to set the
power to 0 W, then press to activate the countdown.
Please note: The timer does not activate any of the
cooking cycles.
To stop the timer at any time, press
WWW
Download the Use and Care Guide from www.hotpoint.eu for helpful cooking tables and the table of tested
recipes, compiled for the certification authorities in accordance with standards IEC 60705 and IEC 60350.