Service manual

ASSISTANCE
EN
30
Service Manual
P0055 Coffee Machine - 2006
Edition
2006.08.28
Language
English
7. Fit the new gear and mesh it with the spindle pinion;
now secure the gear with the washer and locknut.
8. Tighten the nut onto the brass spindle shaft with
the 7 and 10 mm wrenches.
9. Apply grease to all the gear teeth..
10. Smear the grease uniformly and generously over
the entire gear.
11. Apply grease also to the teeth of the worm gear
on the grinder motor shaft.
12. Couple the motor fl ange with the rest of the unit
as shown in the fi gure.
13. Insert the locking pins as shown in the fi gure and
press them fully home.