Service manual

ASSISTANCE
EN
29
Service Manual
P0055 Coffee Machine - 2006
Edition
2006.08.28
Language
English
Disassembly of the coffee grinder motor
1. Undo the four fi xing screws of the motor fl ange.
2. Remove the sensor support from the fl ange seat
with the aid of a small screwdriver (as shown in
the fi gure).
3. Remove the rubber plug from the motor fl ange.
4. Remove the sensor from the fl ange seat by pressing
on the anchoring tab.
5. Disconnect the motor power cables.
6. If the gear is damaged, remove it using a 10 mm
wrench and a 7 mm wrench to unscrew the
locknut.