Operation Manual

10
GB
SBS System
The machine has a device to regulate the body of
coffee: SBS.
This system gives
optimal brewing with
any kind of coffee on the
market.
! Regulation can even be
done while the coffee is
brewing.
Turn the knob to
regulate.
Rotate knob:
• left for crème café;
• to the centre for espresso;
• right for a strong coffee.
Regulating the quantity of coffee per cup
The machine is programmed to brew 3 kinds of coffee:
espresso coffee with the key,
regular coffee with the key;
long coffee with the key.
To adjust the
programmed values to
the size of the cup, place
the cup beneath the
brew unit.
Press the key
and using the
key scroll through the
functions until you get to:
PROGR. COFFEE LENG.*
PROGR. WATER AMOUNT
Press the key; the display shows:
SELECT PRODUCT
PROGRAMM. COFFEE
press the key to brew the required type of coffee
( , or ); this is shown on the display (e.g.):
1 SMALL COFFEE
PROGRAMM. COFFEE
Wait for the cup to fill with the required amount. Press
the key again.
In this way the machine is programmed to brew the
quantity of coffee you require.
Brewing coffee (1 cup)
! Before brewing coffee, make sure the water tank and
the coffee tank are full and that the display shows:
SELECT PRODUCT
READY FOR USE
Place 1 cup beneath the
brew spout.
You can adjust the height
of the spout to your cups
by shifting it up or down
manually.
To brew the coffee, press the coffee brewing key (
,
or ). This is shown on the display (e.g.):
1 SMALL COFFEE
PREBREWING...
In this operating mode the machine automatically grinds
and measures out the right amount of coffee.
Next the brew cycle is started.
After the prebrewing cycle, the coffee begins to come
out of the brew spout.
The display will show:
1 SMALL COFFEE
DISPENSING
Dispensing stops automatically when the set level is
reached.
! It is nevertheless possible to interrupt dispensing of
coffee by pressing the ( , or ).
Brewing