Operating instructions

B022

The colon now blinks once a second.

AM/PM TIME DISPLAY

If you press the “+/-h”and “h”keys as the same time, the time display swit-

ches into the AM/PM mode.

Notes: If you keep the “h” and “m” keys pressed down for more than 2

seconds, the display will enter fast forward scroll mode.

ENTERING THE SWITCHING TIMES

If your entry is incomplete, the segments not yet

selected will blink in the display.

You have 20 memory locations available. Each swit-

ching time takes up one memory location.

Keep pressing the

“Prog” key until a free memory

location is shown in the display “-- : --”.

Program ON or OFF with the “”key:

“”= ON - “”= OFF.

Enter the hour using

“h”; enter the minutes using “m”.

If a switching command is to be carried out every day (1 2 3 4 5 6 7) then

store using the “”key, otherwise select the days it is to be carried out

on by using the “Day” key.

When the day selection is left blank, the programmed switching instruction

operates at the same time every day.

1 2 3 4 5 6 7 Monday ..... Sunday

1 2 3 4 5 6 Monday ..... Saturday

1 2 3 4 5 Monday ..... Friday

1 2 3 4 5 6 7 Saturday ..... Sunday

1 Monday

..... (selection of single days)

7 Sunday

Store using the

“”key or push “Prog” key if you are going to continue

programming. The time switch enters the automatic operating mode and

displays the current time of day. Begin any further entry of a switching time

with the “Prog” key.

If necessary, once you have finished programming, and have returned to

the current time display, by pressing the

“”button, the timer will not auto-

matically switch to the current programmed status until the next timed set-

ting. You can put the timer into the correct mode with the “”key.