Technical information

54
1
8.6.10. Removing the overheat thermostat
1. Remove the casing as in step 18.2.1 ;
2. Pull off the thermostat connections. Then remove the
thermostat from the pipe by releasing it’s securing clip
(see Fig. 18.73).
18.6.11 Removing the heating temperature sensor
1. Remove the casing as in step 18.2.1 ;
2. Pull off the NTC connections. Then remove the NTC
from the pipes by releasing clips
(see Fig. 18.74).
Fig. 18.74
Fig. 18.73
18.6.12 Removing the tank temperature sensor
1. Remove the casing as in step 18.2.1 ;
2. Pull off the NTC connections. Then remove the NTC
from the tank by removing the screws
(see Fig. 18.75).
Fig.18.75
Fig. 18.76
1
8.6.13 Removing the flow switch
1
.
R
emove the casing as in step
1
8.2.1
;
2. Remove electrical connection and the two clips fixing the
flow switch
(see Fig. 18.76);
3. Pull down the lower pipe and remove the flow switch;
4. Reassemble in reverse order, the arrow must be
positioned correctly
(see Fig. 18.77 and 18.78).
5. Reassemble in reverse order
Fig. 18.78
Fig. 18.77