Technical information

Table Of Contents

Fig. 18.23

Fig. 18.22

Fig. 18.21

18.4.1 Removing the sealed chamber front panel

1. Carry out step 18.2.1;

2. Unscrew the six self tapping screws “D” to release the

sealed chamber front panel and lift clear

(see Fig. 18.18);

3. Reassemble in reverse order.

18.4 Access to the Sealed Chamber

Fig. 18.18

18.4.2 Removing the combustion chamber front panel

1. Carry out steps 18.2.1 and 18.4.1;

2. Unscrew the four self tapping screws “E”

to release the

combustion chamber front panel and lift clear

(see Fig. 18.19);

3. Reassemble in reverse order.

Fig. 18.19

18.4.3 Removing the burner

1. Carry out steps 18.2.1, 18.4.1 and 18.4.2 as above;

isconnect the electrode wires

(

see Fig. 18.20);

3. Remove the two caps “F” from the bottom of the

combustion chamber

(see Fig. 18.21, Fig 18.22);

4. Remove the nut “G” between manifold and gas pipe (see

Fig. 18.23);

5. Then, pull the burner toward you (see Fig. 18.24);

6. Reassemble in reverse order and carry out combustion

tests.

Fig. 18.20

Fig. 18.24