Technical information

11
403
FLUE TEST FEATURE
(only for authorised personnel)
The “C” Summer/Winter/Flue Test selector knob can be set to <> to
bypass temperature adjustment on the heating circuit for the purpose of
analysing the fumes produced by combustion.
To access this mode, open a water tap or taps so that the flow rate is
no less than 8 litres per minute.
Then press the “C” selector knob in and turn it from <> or <>
to the <>.
WARNING!
The flue test feature eliminates the slow-light feature.
This mode must only be selected by a qualified service engineer.
C
UT008Aq