Technical information

1.3.4 Removing the electrodes

1. Remove the burner (see fig.1.10);

2. Remove the screws “H” and disconnect the electrode

cables slide the electrodes gently downwards (see fig.

1.11-1.12

);

3. Disconnect the detection electrode cable at its only

connection point close to the P.C.B. (see fig. 1.13);

1. Undo the nut “G” of the gas pipe (see fig. 1.7) ;

2. Lift up the main burner to free the main gas

connection and pull forward very carefully

(see fig. 1.8);

3. Remove the injectors (see fig. 1.9);

1.3.3 Removing the burner and the injectors

Fig. 1.7

Fig. 1.8

Fig. 1.9

Fig. 1.10

Fig. 1.11

Fig. 1.12

Fig. 1.13

To replace, repeat the

steps in reverse order,

paying particular atten-

tion to the following:

a -Centre the electrode

in the locating hole

carefully, otherwise

the electrode may

break;

b -Check that the cables

have been connected

correctly.