Installation manual

Supplied By www.heating spares.co Tel. [phone]
8
B005
1. Disconnect the silicone pipes “M” and remove the screw “N”
(see fig. 1.20) ;
2. Extract the venturi (see fig. 1.21) .
Removing the venturi device
1. Disconnect electrical connections and remove screws
“O” using a No. 2 star tipped screwdriver (see fig.1.22) ;
2. Pull fan to the right and forward and remove (see fig.1.23 );
3. Remove fan from mounting plate;
4. Remove screws “P” (see fig.1.24) .
Removing the fan
M
N
Fig. 1.20
Fig. 1.21
Fig. 1.22
Fig. 1.23 Fig. 1.24
O
O
P
P