User Manual

2 / EN
Introduction
Dear Madam,
Dear Sir,
thank you for choosing the ARISTON NIMBUS HYBRID MOD-
ULE M NET R32 system.
This manual was drawn up with the aim of informing you on
how to use the system, in order to enable you to optimally use
all the functions.
Store this booklet, as it contains all the necessary information
regarding the product following its initial installation.
To find your nearest Technical Assistance Service, please see
our Internet website www.Ariston.com.
Please also refer to the Warranty Certificate that you will find
inside the packaging, or which was handed to you by the in-
staller.
Symbols used throughout this manual
and their meaning
i
WARNING Indicates important information
and particularly delicate operations.
a
WARNING: DANGER Indicates actions that,
if not performed correctly, can lead to gener-
al injuries or malfunctions or material dam-
ages to the appliance; they therefore require
special attention and adequate training.
Warranty
The ARISTON product is covered by a conventional warranty,
which takes effect from the date of purchase of the appliance.
For the warranty conditions, refer to the warranty certificate ac-
companying the product.
Compliance
The CE marking applied to the appliance certifies that it con-
forms with the essential requirements of the following Europe-
an Directives:
– 2014/30/EU (Electromagnetic Compatibility Directive)
– 2014/35/EU (Low Voltage Directive)
– RoHS 3 2015/863/EU on restrictions regarding the use
of certain hazardous substances in electrical and elec-
tronic appliances (EN 50581)
– Regulation (EU) no. 813/2013 relative to ecodesign (no.
2014/C 207/02 - transitional methods of measurement
and calculation)
– 2014/68/EU (PED)
Disposal
PRODUCT CONFORMING TO EU DIREC-
TIVE 2012/19/EU and to Italian Legisla-
tive Decree 49/2014 pursuant to Art. 26
of Legislative Decree no. 49 of 14 March
2014, “Implementation of Directive
2012/19/UE on waste of electrical and
electronic equipment (WEEE)”.
The barred wheeled bin symbol appearing on the appliance or
on its packaging indicates that the product must be collected
separately from other waste at the end of its useful life.
The user must therefore deliver the decommissioned product
to an appropriate local facility for separate collection of electro-
technical and electronic waste. Alternatively, the appliance to
be scrapped can be delivered to the dealer when purchasing
a new equivalent appliance. Electronic products for disposal
measuring less than 25 cm can also be delivered free of charge
to electronic equipment dealers having a surface area of at
least 400 m
2
, without having to purchase other products.
Proper separated collection of the decommissioned appliance
for its subsequent recycling, treatment and eco-compatible
disposal helps to prevent negative effects on the environment
and human health, besides encouraging reuse and/or recy-
cling of its constituent materials.