User Guide

EN
13
LEGIONELLA BACTERIA FUNCTION
Legionella are small rod shaped bacteria which are a natural constituent of all fresh waters. Legionaries’ disease
is a pneumonia infection caused by inhaling of Legionella species. Long periods of water stagnation should be
avoided; it means the water heater should be used or ushed at least weekly.
The European standard CEN/TR 16355 gives recommendations for good practice concerning the prevention of
Legionella growth in drinking water installations but existing national regulations remain in force.
This electro-mechanical storage water heater is sold with a thermostat set at a temperature of 55°C; it
means it is enabled to carry out a “thermal disinfection cycle” to restrict the Legionella growth inside the tank.
TECHNICAL CHARACTERISTICS
For the technical specications, refer to the nameplate (the nameplate is located next to the water intake/outlet
pipes).
The power consumption data in the table and the other information given in the Product Fiche (Annex A to this
manual) are dened in relation t
o EU Directives 812/2013 and 814/2013.
Products which do not have the label and Product Fiche required for boiler/solar power congurations pursuant
to regulation 812/2013 may not be used in such installations.
The products are sold with the thermostat blocked at the operating temperature that ensures the best energy
performance, as shown in Table 3 and on the Product Sheet.
This appliance is conforming with the international electrical safety standards IEC 60335-1 and IEC
60335-2-21. The CE marking of the appliances attests its conformity to the following EC Directives, of
which it satises the essential requisites:
- LVD Low Voltage Directive: EN 60335-1, EN 60335-2-21, EN 60529, EN 62233, EN 50106.
- EMC Electro-Magnetic Compatibility: EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3.
- RoHS2 Risk of Hazardous Substances: EN 50581.
- ErP Energy related Products: EN 50440.
This product is in conformity with REACH regulations.
Table 1 - Product information
Product range
6
Weight (kg)
6
Installation Oversink Undersink
Model Refer to the nameplate
Qelec (kWh)
2,489 2,781
Load prole XXS
L
wa
15 dB
wh
35.0% 32.0%
Storage Volume (l)
6