Alteas ONE Net User Manual
/ 9
USER’S MANUAL
20/11/15
AUTO
C Heating active
10:22
40°
70°
0°
1,5 bar
Auto button - Temperature adjustment activation
The AUTO function enables boiler operation to be adapted to
environmental conditions and to the type of system it is installed on.
Comfortable temperature is reached inside the room in the quickest
way possible, without wasting money, energy or efciency, while
substantially reducing the amount of wear experienced by the
components.
Your installer will advise you on the devices connectable to the boiler
and will program it according to the system.
In normal boilers the water temperature inside the heating elements is
usually set to a high value (70-80°C), thereby ensuring effective heating
during the few really cold winter days. It then becomes excessive on
less cold days (of which there are many) more typical of the autumn
and winter seasons. This leads to excessive room heating after the
thermostat has been switched off, resulting in energy waste and
uncomfortable conditions inside the room.
The AUTO function “takes control” of the boiler and selects the best
operating regime based on environmental conditions, external devices
connected to the boiler and the performance required. It constantly
decides at which power level to operate based on the environmental
conditions and the room temperature required.
This function may be enabled by pressing the AUTO button 7.
When the function is enabled the text AUTO appears on the display.