Alteas ONE Net User Manual

16 /
USER’S MANUAL
No lunch program
Midday program
Always active
Family program
GUIDED PROGRAMMING
To facilitate schedule programming procedures,
conguration can be carried out via:
-Wizardtimeprogramming
-Pre-setprograms
Press the programming key to select:
- WIZARDTIMEPROGRAMMING
Press the OK button.
Press the programming key to select the zone in which you
wish to apply schedule programming.
Press the OK button.
Press the programming key
to select:
- Settimeprogram
Press the OK button.
Now follow the step-by-step instructions which appear
on the display from time to time.
- PRESETPROGRAMS
Press the OK button.
Press the programming key to select the zone in which you
wish to apply schedule programming.
Press the OK button
Press the programming key to select:
- Setprogramming
Press the OK button.
Press the programming key to select among the
following:
-Familyprogram
-Nolunchprogram
-Middayprogram
-AlwaysActive
Press the OK button to conrm.
Press the programming key to scroll through the days
and the heating program start and end time.
Press the programming key to select save, then press
the OK button.
Press the ESC button to return to the previous screen.
Selecting
half-day program
- TIMEPROGRAM/MANUALMODE
(this mode can be used to select either programmed or manual
zone heating management)
Press the OK button.
Press the programming key to select the zone to which
you wish to apply the setting.
Selecting
operating mode for
zone 2
Zone 1
Zone 2
Zone 3
All zones
MANUAL HEATING MODE
Manual mode disables heating schedule programming.
Manual operation allows the heating to be kept on constantly.
To select manual boiler operation, press the OK button to access
the Menu.
Press the programming key to select:
- TimeProgram
Press the OK button.
Press the programming key to select:
-Manual
Press the programming key to select Manual mode and
press the OK button.
Press the OK button again to save these settings. The display
reverts to showing the previous screen.
Press the back button until the main screen reappears.
Select scheduled or manual programming.
Press the OK button.
Press the ESC button
to return to the previous screen.
Selecting manual
mode
Time Programn Manual
Mode Setting