Alteas ONE Net User Manual

14 /
USER’S MANUAL
HEATING HOT WATER SETTING
Access to the USER’S MENU
Press the programming key to select:
- CentralHeatingsettings
Press the OK button.
CH Settings
DHW Settings
Connectivity Settings
Screen Settings
To set the ow temperature, press the programming key
and select:
- CentralheatingSetpointTemperature
Press the OK button.
The display screen shows:
- Zone1setT
- Zone2setT - active with Sensys connected
- Zone3setT - active with Sensys connected
Press the programming key to select:
- Zone1setT
Press the OK button.
Press the programming key to set the ow temperature for
the selected zone.
Press the OK button to conrm.
Repeat the above procedure to set the  ow temperature for
the other zones, if applicable.
Press the ESC button
.
Selecting Heating settings
NOTE
If there is only one heating zone, the setting of
the ow temperature is done by the keys 9 - see p. 7
T set Z1
Press OK to confirm
Set the flow temperature of zone 1
75°C
Change heating hot
water temperature
Press the programming key to select:
- Homescreentiming
Press the programming key to set waiting time before
the display come back to the home screen (from 1 to 15
minutes)
Press the OK button to con rm.
Press the programming key to select:
- Soundfeedbackvolume
Press the programming key to select the levelof sound
feedback when you press the display button (from 1 to 10).
Press the OK button to conrm.
Press the back button
to return to the previous screen.