Alteas ONE Net User Manual

/ 13
USER’S MANUAL
DHW Settings
Connectivity Settings
CH Settings
Screen Settings
Date
Time
Legal hour
20 / 11 / 2015
11 : 14
Friday
Save
Auto
DISPLAY SETTINGS
The main screen of the display can be customised. The main
screen can be used to check the time, date, boiler operating
mode, temperature settings or temperatures detected by the
accessories, schedule programming.
Press OK to access the display settings.
Press the programming key and select:
- Screensettings
Press the OK button.
The “Screen settings” menu can be used
to select the following parameters:
- Language
Press the OK button.
Press the programming key and select the desired
language.
Press OK to con rm the choice, and press the back button
,
to return to the previous screen.
Press the programming key and select:
- Dateandtime:
- Press the OK button.
- Press the programming key and select the date,
- Press the OK button.
- Press the programming key to select the exact day.
- Press the OK button to conrm and move on to the month
followed by the year, pressing the OK button to conrm
after each step.
- Press the programming key to select the time,
- Press the OK button.
- Press the programming key to select the exact hour
- Press the OK button to conrm and move on to the minute
value.
- Press the OK button to conrm
- Press the programming key to select summer time,
- Press the OK button
Press OK to con rm the choice, and press the ESC button
,
to return to the previous screen.
Press the programming key
to select:
- Zonetobesetbydisplay
to set the heating zone to show on the display
Press the programming key to select:
1Setzone
 2Setzone
 3Setzone
Press the OK button to conrm your selection.
Press the ESC button
to return to the previous screen.
Press the programming key to select:
- Homescreen
when selecting the start screen settings, you can choose
which information to display.
Press the programming key to select:
Boilerbase
 Boilercomplete
Press the OK button to conrm your selection.
Press the ESC button
to return to the previous screen.
Boiler base
Boiler complete
Setting the date and time
26/10/15
AUTO
C. Heating Active
COMFORT
12:30
60°
82°
10°
1,5 bar
26/10/15
1,5 bar
AUTO
C. Heating Active
COMFORT
12:30
60° 82°
10°
20,5°
3
00 02 04 06 08 10 12 14 16 18 20 22 24
Press the programming key to select:
- Automatickeylock
Press the programming key to enable (ON) or disable
(OFF) the keylock with the dispaly stand
Press the OK button to conrm.
Press the ESC button
to return to the previous screen.
Press the programming key to select:
- Standbytiming
Press the programming key to select the timing to pass
at stand-by after the last use (from 1 to 10 minutes or 24
hours)
Press the OK button to conrm.
Press the ESC button
to return to the previous screen.
Press the programming key to select:
- Brightnessinstandby
Press the programming key to adjust the brightness of
the display during standby periods.
Press the OK button to conrm.
Press the ESC button
to return to the previous screen.