User Manual

SLEEP/INTELLIGENT EYE function

Keep this button pressed for at least 2 seconds to activate the SLEEP function.

By keeping it pressed for more than 2 seconds, the INTELLIGENT EYE function is acti-

vated.

• The Sleep function allows the unit to automatically increase (cooling) or decrease

(heating) the temperature by 1°C an hour for the ﬁ rst two hours, to then remain con-

stant for the next 5 hours and ﬁ nally shut down. In this way it is possible to maintain

an optimal temperature in terms of both comfort and energy saving.

NOTE: The SLEEP function is only available in cooling, heating and AUTO mode.

• The Intelligent Eye function allows the air conditioning unit to enter the stand-by

mode if it does not detect any activity for more than 30 minutes. The unit reactivates

automatically with the previous settings as soon as the presence of people is identi-

ﬁ ed.

The air conditioning unit deactivates this function each time it is turned off or the

SLEEP, SELF CLEAN or TIMER button is pressed.

LED/FOLLOWME function

Keep this button pressed for at least 2 seconds to activate the LED function which turns

off the display of the internal unit.

By keeping it pressed for more than 2 seconds, the FOLLOW ME function is activated.

• By activating the Follow Me function, the remote control system detects the actual

temperature in the room where it is located and sends this signal to the air condi-

tioning unit every 3 minutes, until the FOLLOW ME button is not pressed again.

• The Follow Me function is not available in DRY and FAN mode.

• By switching to a different operating mode or turning off the unit, the Follow Me

function is automatically deactivated.

TURBO/SELF CLEAN function

Keep this button pressed for at least 2 seconds to activate the TURBO function. By

keeping it pressed for more than 2 seconds, the self clean function is activated.

• The Turbo function allows the unit to reach the preset temperature in the shortest

time possible. When the unit is in cooling or heating mode, by

pressing this button a

strong air ﬂ

ow is activated with the fan at maximum speed.

• In SELF CLEAN mode, the air conditioning unit automatically cleans and dries the

evaporator, keeping it in optimal conditions for subsequent operation. (through a

fan, heating, low speed fan cycle). The Self Clean function is only activated in cooling

or dry mode.