User guide

Telephone Router Setting User Guide
Aristel Networks Pty Ltd 4x4 PABX/Router User Guide and Setting Tool Programming Rev 3.6
8
Note
a) If error tone “Du, Du” is heard after pressing flash/recall, it indicates the
system is busy. You can press flash/recall again to go back to the called party.
b) While transferring a call, if you dial an invalid number, the system sounds 3 short
error tones. During that time you can again dial another number for transferring.
c) While transferring a call, and the called phone is busy, the system will sound a 15
sec error tone. Then, you can press flash/recall to reconnect with the outside line.
You may retry that extension or dial another.
Important
System flash time at default is 80 x 10 = 800 ms , (maximum flash time.)
Therefore, a telephone flash key needs to be typically set to 100ms.
In Aristel Smart phones and Multiphones a flash setting of 010 x 10 = 100ms works well.
On all other ordinary phones a quick tapping of the cradle switch can give a loop break of
nearly 500ms.and that works fine.
3.6 Call Forwarding. There are two types of Call forwarding:
(i) Internal.
(ii) External.
For either type, call forwarding is immediate.
In the case of Internal call forwarding, Pick up the handset and dial,
* # 8 * xx where xx is the call forwarded extension number.
You will get a confirmation tone at the end.
To cancel Call forwarding dial * # 8 #
In the case of external Call forwarding, pick up the telephone handset
and dial * # 8 xxxxxxxxxx # , where xxxxxxxxxx is the external number.
To cancel external call forwarding, dial * # 8 #
Please note, there will be no indication that an extension has been
call forwarded.
3.7 Hot Line
Hotline is a feature that allows an extension ( programmed for hot line ) to
automatically dial another extension or an external party, immediately the
handset goes off hook. There are many applications for this feature.
Connecting a Fax machine, EFTPOS machine, Door phone to extension ports
or making a baby call are examples of hot line.