User guide

Telephone Router Setting User Guide
Aristel Networks Pty Ltd 4x4 PABX/Router User Guide and Setting Tool Programming Rev 3.6
5
calls from any extension can pick up any line. There is no need to dial 9 or 0
for outside line access. Simply dial the external number.
Additional trunk lines can be terminated on the respective Line ports and
activated through phone programming or PC programming.
2. Power Setting
The power requirements of the device are AC230V±10% or AC110V±10%
50/60HZ. In the base of the device there is a power select switch. The 4x4
is supplied with the switch set to 230 volt.
If your input power supply is AC230/240V, you should leave the power
select switch as Fig.1.
WARNING: DO NOT SET THE SWITCH TO 110V IN AUSTRALIA
AS IN FIG. 2
1 2
2.1 Music on Hold
The PABX has chime as internal source for music on hold.
An external music source can be connected to the system using the
cord provided for that purpose.. Any external Music on hold source
should only be connected to the system using a suitable LIU unit.
230V
110V