User guide

Telephone Router Setting User Guide
Aristel Networks Pty Ltd 4x4 PABX/Router User Guide and Setting Tool Programming Rev 3.6
27
parameters. You can use PC Software [Import All] to import all the backup
data and “Send Data to Device”. In this way, you can recover all the
parameters as you set previously. You can also send the parameters data to
your remote clients in the above method.
12. Product Specification
Power Supply: AC230V±10% 50/60HZ & AC110V±10%
Power consumption: ≤15W
Ringing Current: AC70V±10% 50HZ
Environment temperature: 0-40℃
Humidity: 10%-90%
13. Case Study - 2
(Programming by Setting Tool Software)
A company called ACME wants the following implemented.
Two PSTN lines terminated on Line1 and Line 2.
Aristel AN1001, a GSM dialer terminated Line 4.
Three SLT phones,( MultiPhone SLT70) installed as Tel1, Tel3 and Tel 4.
Engenius SN902, long range cordless base station with one handset
terminated as Tel2
Line 1 incoming calls are expected to ring Tel 1, Tel 2 and Tel 4 only.
Line 2 incoming call to ring Tel 3 only.
Incoming mobile calls through GSM dialer AN1001 is to ring Tel 1 and Tel 4
All external calls except Mobile calls need to pass through Line 1 and Line 2.
All Mobile calls starting on 04 need to pass through AN1001 GSM dialer
terminated on Line 4
Tel 3 should have capability to Call Forward all calls either to Tel 2 or to his
Mobile [phone] and to cancel the call forward when desired. Call
forwarded Mobile calls need to pass through AN1001, GSM dialer,
terminated on Line 4.