User guide

Telephone Router Setting User Guide
Aristel Networks Pty Ltd 4x4 PABX/Router User Guide and Setting Tool Programming Rev 3.6
18
7.1 Introduction
In the Main Parameters grid, only the slots in white can be edited.
At first, introduce the line grouping function. The telephone router has 4
Trunk lines . These trunk lines can be classified in 2, 3 or 4 groups.
"0" is common group. "1" is special group 1.
"2" is special group 2. "3" is special group 3.
For example, [Trunk 1 belongs to Trunk Group 0] indicates that the first
external line belongs to “Common Group”. You should set at least one
special group, that is to say, you cannot to set all trunks in group 0.
[External 1 On/Off]: If this option is ticked, you are activating Line 1.
[External N On/Off]: The same as above.
[Use common Trunk on all special trunk busy]: If this option is ticked
common trunks belonging to group 0 will be used in case special trunks
go busy. In the example provided in the Main parameters grid, trunk 1 will
be used if trunks 2,3 are all busy.
[Use special trunk on all common trunks busy] If ticked the system
allows special trunks, marked 1, 2,or 3 in the grid, to be used in an event
designated common trunk goes busy.
[Use other special trunk on all special trunk busy] If ticked the system
allows another special trunk to be used in case the designated special
trunk goes busy.
[Special Trunk incoming] When ticked allows incoming calls on
special trunk If un-ticked the call rings nowhere.
[Common Trunk incoming] When ticked allows incoming calls on
common trunk. If un-ticked the calls rings nowhere.
[Special trunk outgoing] When ticked allows outgoing calls can go
through the special trunks.
[Common Trunk outgoing] When ticked the system allows outgoing
calls to go through the common trunks.
[Code password]: The telephone router has functions and parameters
that can be set from a telephone. But, first you should enter *#*
XXXX from the telephone where XXXX is the password. The default
password is 0000.
Click [Send data to device] button to transfer system parameters to
telephone router and save it after modifications.