User guide

Telephone Router Setting User Guide
Aristel Networks Pty Ltd 4x4 PABX/Router User Guide and Setting Tool Programming Rev 3.6
13
Implementation
Install Aristel SLT70 phones. Use only two wire line cords.
Terminate Lines on Line 1 and Line 2. Use only two wire line termination.
Lift the handset of one of a registered telephone and enter the following:
* # * 0000
Enter into programming mode
0000#
Initilise all parameters
2010#
Turn off all trunks
2001#
Turn on Line 1
2002#
Turn on Line 2
6011#
Incoming call on Line 1 to ring Tele 1
(11)
6014#
Incoming call on Line 1 to ring Tele 4
(14)
6122#
Cancel line 2 ringing Tele 2
6023#
Incoming calls on lone 2 to ring Tele 3
(13)
1724#
Set Co-Co disconnect time as 4
minutes.
Go on hook.
Terminate programming.
No need to program 6
5.2 Programming the DSS keys of Aristel Multiphone, SLT70
phone of Tele 13 for call forwarding.
Lift the handset of Tele 13 and enter the following:
Press prog key, enter 00000 and cmf button
Get into programming
mode
Press the DSS1 button ( the leftmost button in the
last row)
Select DSS 1 key
Enter * # 8*12
Set call forward to Tele 14
Press cfm button and then prog button
Confirm and enter
programming again
Press DSS 2 button (second rightmost button)
Select DSS2
Enter *#80428888888#
Set call forward to
0428888888
Press cfm button and then prog button
Confirm and enter
programming again