User guide

Telephone Router Setting User Guide
Aristel Networks Pty Ltd 4x4 PABX/Router User Guide and Setting Tool Programming Rev 3.6
10
Command Table
No
Command
Description
1
0000#
Initialize all parameters.
2
09XXXX#
Setting Code Password as “XXXX”. Default: XXXX=0000
3
10TT#
Setting a pause “p” unit delay as TT*100ms (TT=01-20).
Default: TT=08 . Unit pause at default is 800ms
4
11N#
Ring-Back on Call Transfer No Reply. Default: N=1
N=0, Not Ring-Back.
N=1, Ring-Back.
5
11TT#
Call Transfer Time (TT=01-99, Unit 1 sec.
Default: TT=20 Sec.)
6
12N#
Caller ID Add Prefix. Default: N=1., N=0, Not dd.
N=1, Add.
7
12ab#
Caller ID Add Prefix Number (Default: ab=88)
8
14X#
Call Pick-up Function Key (Default: X=9)
9
15TT#
Flash Time (TT=01-20, Unit: 100ms, default :TT=08)
10
16TT#
External line Hold Time (TT=01-99, Unit: 10sec. Default:
TT=18, equal to 3 min.)
11
17TT#
Transferred call Talking Time or Co-Co call disconnect
time (TT=01-99, Unit 10s, Default: 24 .)
12
18TT#
Ring Time for Internal Call (TT=01-99, Unit: 1 sec.
Default: TT=30 sec.)
13
2000#
Turn On all Trunk
14
2010#
Turn Off all Trunk
15
200M#
Turn On Trunk M (M=1-4)
16
201M#
Turn Off Trunk M (M=1-4)
17
60M#
If it has an incoming call from trunk M (M=1-4), all
extensions will ring.
18
60MN#
Add the extension N as ringing extension for the trunk M
on incoming call. For example, if it has an incoming call
from trunk M (M=1-4), extension N will ring (N=1 – 4).
Note: Earlier settings should be cancelled by
command 61M# or 61MN# before executing the
above command.
19
61M#
Cancel the command “60M#”
20
61MN#
Cancel the command “60MN#”
21
700#
Turn Off all extension hot line function
22
70N#
Turn Off extension N hot line function
23
710#
Turn On all extension hot line function