Specifications
USER MAUNAL
Aristel Group
23
24
EG
6.2.1 CO Line Hunting 9 / 0 or # 4 + [CO Line No.]
This system provides two methods to hunt CO Line.
Automatic CO Line Hunting:
(1) Off hook to hear a dial tone;
(2) Dial CO line hunting code 0 or 9, hear CO line dial tone, then dial
Designated CO Line Hunting:
(1) Off hook to hear a dial tone;
(2) Press # 4, CO Line No. (1
4), hear CO line dial tone, then dialing.
6.2.2 Trunk Queuing Callback * 5
When there is no idle CO line, the user can use “CO Line Queuing” function to make an
appointment for the CO line. As soon as any line becomes idle, the extension will ring, then
off hook to hear a CO line dial tone and begin dialing the telephone number.
(1) Off Hook, Hunt a CO line, Hear busy tone;
(2) Flash to hear a dial tone;
(3) Press*5, hear “Do, Do, Do…” Confirmed Tone; then on hook.
Note:
If the user hunt a designated CO line, the ringing back CO line is the designated CO Line.
Callback For Trunk Queuing becomes void in one of following three cases
a. The user lifts the handset before the system calls back.
b. The user doesn’t lift the handset after ringing back lasts 45 seconds
c. There is an incoming call through the CO line being ringing back to the user.
6.2.3 Last Number Redialing [ “Redial” Key]
(1) Off Hook to hear a dial tone;
(2) Press the “Redial” Key of SLT.
6.2.4 CO Line Flash # 59
This feature is to send Flash signal to the CO line to complete some function provided by the
carrier such as call waiting.
(1) While talking with a CO line, Hook flash or press “Flash” Key;
(2) When hear a dial tone, press # 59.
Note:
Users are permitted to operate the “CO Line flash” only when 16 seconds later after
dialing a Minimum 4-digits number;
If the extension is not set any prefixed code, and is also not restricted by special local or
prohibited code, the user is permitted to operate the “CO Line flash” without any waiting
after dial a Minimum 6-digits number.