Specifications

USER MAUNAL
Aristel Group





 



 21
24
EG
R=0: Adaptive Multi Rate (AMR)
R=1: Full Rate (FR)
(2) Hear dial tone while setting successfully.
Note: The default value for the voice rate is AMR (adaptive multi rate)
5.44 Working Mode of 1
st
GSM Channel # * 85 + [0/1]
The system provides fax function through GSM channel. But only the first GSM channel can
be used for fax. To have this function work, you maybe have to subscribe to the carrier.
(1) Under the system program mode, Press # * 86, then M:
M=0: The first channel can be used for fax only
M=1: The first channel can be user for both voice and Fax
(2) Hear dial tone while setting successfully.
5.45 GSM Channel Prefixed Number # * 86 + [Prefixed number] + #
This setting is to set a prefixed number which can be automatically added to the front of the
dialed outgoing number with 0 initial through GSM channel.
(1) Under the system program mode, Press # * 85 and the Prefixed Number (Maximum 4 digits),
then #;
(2) Hear dial tone while setting successfully.
Note:
 The factory default value of prefixed number is None.
 To cancel prefixed number: # * 85 + #
5.46 Remote programming
EG-24 provides remote programming to facilitate the distributor’s after-sales service. The
function is available no matter the CO line answering mode is set as DISA answering mode or
ringing the assigned extension
a. DISA answering mode
The outside caller call in on a DISA CO line using a DTMF telephone set.
(1) The auto attendant response with voice announcement
(2) To start up remote programming, the outside caller dial # * 10 +system password (00000 as
default value) to enter system programming while dial tone is heard.
(3) Enter required setting item as a local extension would do in programming mode.
(4) “Di” is heard to indicate a successful setting or “Di Di” to indicate a failing setting. No matter
whether “Di” or “Di Di” is heard, another setting item can be proceeded to.
b. Ringing the assigned extension Mode
(1) The extension user is talking with the outside party.
(2) The extension user does the Flash operation and hear dialing tone.