Specifications
USER MAUNAL
20
Aristel Group
24
EG
dial the virtual extension number, the first free extension will ring according to the sequence in
the setting.
(1) Under the system program mode, press # *53, group No. (1-4), virtual extension No., Ext.
No.1, Ext. No.2,…., Ext. No. n (Maximum n=8) and I
I = 0: To untie the set extension(s) from the virtual extension number
I = 1: To bundle the set extension(s) with the virtual extension number
(2) Hear dial tone while setting successfully.
5.39 Reserved # * 54
# * 80
5.40 Turn on/off CLI Number On Outgoing Calls # * 81 + [0/1]
CLI stands for calling line identification.
(1) Under the system program mode, Press # * 81, then I
I = 0: Turn off CLI number on outgoing calls
I = 1: Turn on CLI number on outgoing calls
(2) Hear dial tone while setting successfully.
Note:
The function depends on the carrier service
The default setting is to turn on the CLI number
5.41 Receiving Level of GSM Channel # * 82 + [GSM Channel No.] + [Receiving Level]
Totally there are 8 receiving levels for the GSM module, ranging from 0 to 7. The larger the
digit, the higher the volume.
(1) Under the system program mode, press # * 82, then GSM Channel No.(1-4) and
Receiving Level (0-7)
(2) Hear dial tone while setting successfully.
Note: The default value for the receiving level is 4
5.42 Sending level of GSM Channel # * 83 + [ GSM Channel No.] + [Sending level]
Totally there are 15 sending levels for the GSM module, ranging from 1 to 15. The larger the
digit, the higher the volume
(1) Under the system program mode, press # * 83, then GSM Channel No.(1-4) and Sending
Level (1-15)
(2) Hear dial tone while setting successfully.
Note: The default value for the sending level is 2
5.43 GSM Voice Rate Setting # * 84 + [GSM Channel No.] + [0/1]
This setting is to adjust the GSM voice rate
(1) Under the system program mode, Press # * 84, GSM channel NO.(=1-4), then R