Specifications
USER MAUNAL
Aristel Group
19
24
EG
at least one extension can’t be set as hot line calling in the system.
The extension being set as hot line calling can’t do the Hold operation.
5.32 Reserved # * 41
5.33 Speed Dialing Setting #*42+[Group No.]+[Virtual Extension No.]+[External No.]+#
The setting is to bundle a virtual extension No. with an external No. The user can make a
speed dial by dialing the virtual extension number to call the correspondent external No.
(1) Under the system program mode, press # *42, then Group No.(01-20), virtual extension
No., External No. and #.
(2) Hear dial tone while setting successfully.
Note:
The virtual extension number should not conflict with the extension number, otherwise the
setting will fail
All the virtual extension number are cleared when the extension number length are
changed
5.34 Reserved # * 4
# * 47
5.35 Enable/Disable 1
st
Prefixed Number # * 48 + [CO Line No.] + [1/0]
This setting is to determine whether to add the prefixed number to the outside call through
some CO line.
(1) Under the system program mode, press # * 48, then CO line No. and I
I = 1: Enable prefixed number to the CO line
I = 0: Disable prefixed number to the CO line
(2) Hear dial tone while setting successfully.
5.36 Reserved # * 49
# * 51
5.37 Empty The Extension No. # * 521
(1) Under the system program mode, press # * 521
(2) Hear dial tone while setting successfully.
Note: This setting is to reset all the extension number to 00 or 000 or 0000 depending on the
extension number length. The setting is used to avoid extension number collision during
the Extension No. setting
5.38 Extension Group Setting # * 53+[ Group No.] + [Virtual Ext. No.] + [Ext. No. 1] +
[ Ext. No. 2] +…+ [ Ext. No. n] + [0/1]
This setting is to bundle a virtual extension number with a group of extensions. When the user