Specifications
USER MAUNAL
18
Aristel Group
24
EG
5.29 Emergency call Setting # * 38 + [Group No.] + [Emergency No.] + #
Up to 5 groups of Emergency call can be set. Each extension can dial emergency No. even
being assigned a COS of being restricted to intercom only.
The default value of five groups of emergency No. is as follow:
01: 110
02: 119
03: 120
04: 122
05: None
They can be substituted to match the emergency call of different country.
(1) Under the system program mode, Press # * 38, Group No. (0105) ,then Emergency No.
and #
(2) Hear dial tone while setting successfully.
5.30 Multiple CO Hunting Code Setting # * 39 + [CO Hunting code] + [CO Line No. 1] +
[CO Line No, 2]… + [CO Line NO.N] + #
Except for 9 (or 0) as fixed CO hunting code, up to 3 more CO hunting code can be set. This
function is to enable the user to seize different CO line group by dialing corresponding CO
hunting code.
(1) Under the system program mode, Press # * 39, CO Hunting Code, then corresponding CO
line No.(s) and #
(2) Hear dial tone while setting successfully.
Note:
9 and o are defaulted as CO Hunting Code and Access code for operator correspondingly
CO Hunting Code can’t be used as the initial digit of Ext. No. and vice versa.
The fixed CO Hunting Code 9 or 0 is defaulted to correspond to all the CO lines. If
modification is needed, please do the setting here.
5.31 Intercom Hot Line setting # * 40 + [Ext. No.] + [Hot Line Ext. No.]
Intercom hot line allows an extension to call another extension automatically without dialing
any digits each time if it is hook off.
(1) Under the system program mode, press # * 40, then Extension No. and Hot Line Extension
No.
(2) Hear dial tone while setting successfully.
To cancel Intercom hot line setting
Under the system program mode, press # * 40, then Ext. No. and #.
Note:
When an extension is set to hot line calling to another one, the extension is unable to call
other extension, make outside call or program any more until the hot line is cancelled. Thus