Specifications
USER MAUNAL
16
Aristel Group
24
EG
Note: The factory default value is 0.6 second.
5.21 Internal/External Music Resources Switch # * 30 + [0/1]
This setting is to choose Internal or External Music Resources.
(1) Under the system program mode, Press # * 30, then I;
I = 0Internal Music Resources
I = 1External Music Resources
(2) Hear dial tone while setting successfully.
Note: The Factory Default is internal music resources.
5.22 Fax Extension Setting # * 31
[Fax Ext. No.]
When a fax extension is set, the outside caller can dial 9 to directly access the fax extension
under auto-attendant voice announcement.
(1) Under the system program mode, Press # * 31, then Fax Extension Number;
(2) Hear dial tone while setting successfully.
Note:
No fax extension is set when factory out. To cancel Fax Extension: # * 31 + #.
After a fax extension is set, you’re suggested to add the message of “for fax please dial 9”
into the Voice Announcement.
Only the facsimile machine connected with the fax extension port can receive the FAX from
the 1
st
GSM channel
5.23 Door Phone Setting # * 32 + [Door Phone Ext. No.]
When an extension is set as door phone, it will call the attendant extension immediately while
off hook.
(1) Under the system program mode, Press # * 32, then the door phone extension No. ;
(2) Hear dial tone whilst setting successfully.
Note: To Cancel Door Phone: # * 32, then #.
5.24 Transfer Indication Tone Selecting # * 33 + [CO Line No.] + [0/1]
When a outside call comes in, the transfer indication Tone can be either the On-hold Music or
the Ring Back Tone.
(1) Under the system program mode, Press # * 33, CO Line No. (9 is to indicate all the CO
lines), then I
I = 0: To set the Indication Tone as Ring Back Tone
I = 1: To set the Indication Tone as On-hold Music
(2) Hear dial tone while setting successfully.
Note: The factory default value is Ring Back Tone.