Specifications
USER MAUNAL
Aristel Group
15
24
EG
5.17 Forced Account Setting # * 26
[Individual ID]
[Individual PW] + [COS]
Forced account consists of a 2-digits ID and a 4-digits Password. Each forced account is
assigned a Class of Service Level. Forced account let you temporarily override an extension’s
toll restriction. This system provides Maximum 40 groups of forced account.
(1) Under the system program mode, Press # * 26, Individual ID (01~40) , individual
passwordthen COS;
(2) Hear dial tone while setting successfully.
Note:
Pls refer to 5.0 Extension COS Assignment for COS definition.
To cancel all the forced account: # * 26 + ** + #.
5.18 1
st
Landline Prefixed Number Setting # * 27 + [1
st
Landline Prefixed Number] + #
This setting is to set a prefixed number, which can be automatically added to the front of all the
dialed outgoing number through analog CO line (CO Line 5 to CO Line 9).
(1) Under the system program mode, Press # * 27, entering the 1
st
landline prefixed Number
(Maximum 4 digits), then #;
(2) Hear dial tone while setting successfully.
Note:
The factory default value of 1
st
landline prefixed number is None.
To cancel the 1
st
landline prefixed number: # * 27 + #.
5.19 2
nd
Landline Prefixed Number Setting # * 28 + [2
nd
Landline Prefixed Number] + #
Besides the 1
st
prefixed number, this setting is to set 2
nd
prefixed number, which can be
automatically added to the front of the dialed number with 0 initial, that is long distance call. The
2
nd
prefixed number is added after the 1
st
prefixed number and only for the outside call through
analog CO line (CO Line 5 to CO Line 9)
(1) Under the system program mode, Press # * 28, entering the 2
nd
landline prefixed Number
(Maximum 10 digitsthen #;
(2) Hear dial tone while setting successfully.
Note:
*can be inserted between the prefixed number to stand for a pause of 2 seconds.
The factory default value of 2
nd
landline prefixed number is None.
To cancel the 2
nd
landline prefixed number: # * 28 + #.
5.20 Flash/Hold time Duration Setting # * 29 + [Duration]
(1) Under the system program mode, Press # * 29, then I, I is to indicate the duration: I = 3
4…9 and stands for 0.30.4…0.9 second respectively;
(2) Hear dial tone while setting successfully.