Specifications
USER MAUNAL
Aristel Group
13
24
EG
M = 5 Only restricted by Prohibited Code;
M = 6 No dialing restriction.
(2) Hear dial tone while setting successfully.
Note:
1 to 5 are all restricted by Prohibited Code. Please refer to 5.15 the Prohibited Code setting.
The default value of all the extension’s COS is 5.
5.10 Extension No. Length Setting # * 18 + [Ext. No. Length I] + #
The extension number length can be set as 2 digits, 3 digits or 4 digits.
(1) Under the system program mode, Press # * 18, and I, then #
I = 2the extension number length is 2 digits;
I = 3the extension number length is 3 digits;
I = 4the extension number length is 4 digits.
(2) Hear dial tone while setting successfully.
Note:
When the setting is done, all the extension number are restored to factory default value:
Extension No. 11~26 for 2 digits, 801~816 for 3 digits, while 8001~8016 for 4 digits.
The default value of extension number length is 2 digits.
5.11 Extension Number Setting # * 19 + [Ext. Port No. 1] + [Ext. No. 1]+*+ [Ext. Port No.
2] + [Ext. No. 2]+*+…+ [Ext. Port No. N] + [Ext. No. N]+*+#
This setting is to assign an extension number to each extension port. Extension number can be
flexibly assigned within 10 to 89, 100 to 899, or 1000 to 8999 after the extension number length
is defined.
(1) Under the system program mode, Press # * 19, Extension Port No. and Extension No., then *
to finish the setting of current Extension Port and to the setting of next Extension Port.
Repeat the above process to continue the other Extension Ports setting
(2) Press # to exit the Extension Number Setting and hear the dial tone.
Note:
The Extension Port Number is a fixed number from 11 to 26.
A busy tone is heard to deny the current extension port setting if the extension number has
already been assigned to other extension port. When this happen, just Flash to hear the dial
tone and remain in program mode.
5.12 System Password Changing #*21
[New System Password]
(1) Under the system program mode, Press # * 21, then enter 5-digits new password.
(2) Hear dial tone while setting successfully.