Specifications
USER MAUNAL
12
Aristel Group
24
EG
5.6 Ringing Extension Assignment # * 14
[Ext. No.]
[CO Line No.]
[1/0]
Under the mode of Ringing assigned extension for incoming calls, when there is an incoming
call, the assigned extension will ring; The operator extension will ring if no ringing extension is
assigned. If the1
st
operator extension is not answered within 25 seconds, the 2
nd
one will ring
together. While if the 1
st
one is busy, the 2
nd
one will ring immediately.
To assign the Ringing Extension:
(1) Under the system program mode, Press # * 14, extension No., CO Line No., then 1;
(2) When the dial tone is heard, the extension is set as the ringing extension for the
corresponding Co line.
To disable the Ringing Extension:
Press # * 14extension No., CO Line No., then 0.
To disable all the Ringing Extension:
Press # * 14and ** (or ***,or **** depending on the ext. No. length), CO Line No., then 0.
Note:
An extension can be set as ringing extension for more than one CO line and one CO line can
be assigned more than one ringing extension as well.
5.7 1
st
Operator Extension Setting # * 15
[Extension No.]
One extension can be set as operator extension. Extension 11 serves as the 1
st
operator
extension under factory default setting
(1) Under the system program mode, Press # * 15, then the extension No.
(2) Hear dial tone while setting successfully.
Note: Press # * 15then # to cancel the 1
st
attendant extension setting.
5.8 2
nd
Operator Extension Setting # * 16
[Extension No.]
The 2
nd
operator extension serves as the backup of the 1
st
attendant extension.
(1) Under the system program mode, Press # * 16, then press the extension No.
(2) Hear dial tone while setting successfully.
Note: Press # * 16then # to cancel the 2
nd
attendant extension setting.
5.9 Extension COS (Class of Service) Assignment # * 17
[Ext. No.]
[Ext. COS]
Each Extension can be assigned one of the six COSs.
(1) Under the system program mode, Press # * 17, Extension No., then Ext. COS M;
M = 1 can dial intercom calls only;
M = 2 can dial local call (number not prefixed by 0) except Special local call and restricted
by Prohibited Code;
M = 3 can dial all the local call, but restricted by Prohibited Code;
M = 4 can dial domestic long distance call (number prefixed by 0 except 00), but restricted
by Prohibited Code;