Specifications

Common Ext. Local Alarm Setting
LCD Displays as Chart 3.9.6 (LCD Display for
“
Console
’
s Local Alarm Clock setting
”
).
System’s Program Setting
Please refer to Zone 301 P=1 for System Program Entering Password setting.
Note: Please refer to the “System Program Manual” for System Program Details.
Ext. “USER HELP”
Note: 1. Press “0” after entering; LCD displays “USER HELP” of the current function.
2. Press “#” after entering; LCD displays “USER HELP” of the next function.
3. Press”
＊
” after entering; LCD displays “USER HELP” of the previous function.
Authorization Codes Operation
Refer to system program in Zone 301 IP=4.
Note: Operating an Authorization Code gives access to a restricted CO line without
Accounting.
Leave-message Function Setting
Refer to system program in Zone 500, 504-ST-03.
Note: 1. There are totally 9 types of Leave-message Status; A superior level can leave
message for a subordinate level, as well as the equivalent levels can leave
messages for each other.
2. The “MSG” LED of the Extension with message will flash; at the same time, LCD
displays the message information.
3. The setting of SLT Leave-message should be coordinated with system program
in Zone 245.
On Hook
Enter Setting
Value
Finished Setting
No Password Protection,
Press “save” Key directly
Enter Password
Finished Setting
On Hook
Enter “USER HELP”
On Hook
Hunt CO
CO Auto
Hunting
Enter Authorization
Code
On Hook
Enter Setting
Value
Finished
Setting
MSG Status
Select